LEXUS RX 300

1998-2003 of release

Repair and car operation


Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   - The power supply system
      The general data and security measures
      Сбрасывание pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, the gauge of a stock of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of a fuel tank and fuel lines
      Removal and air cleaner installation
      Removal, installation and adjustment of the case of a throttle and gauge TPS
      Removal and installation of components of system ACIS
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections

7bd329e4


Removal and installation of the fuel pump, the gauge of a stock of fuel and regulator of pressure of fuel

Components of installation of the fuel pump

1 — the Cover of a service aperture
2 — the Socket of electroconducting of the fuel pump and the gauge of a stock of fuel
3 — the Adjusting plate of a ventilating tube of a fuel tank
4 — the Main tube of a fuel tank

5 — the Clamp of connection of a tube 4
6 — Assemblage of the fuel pump and the gauge of a stock of fuel
7 — the Lining
8 — the Additional reception fuel hose

Assemblage of the fuel pump

1 — the Reception plate with the stock gauge
2 — the Fuel filter
3 — the Fuel pump

4 — the Sealing ring
5 — the Regulator of pressure of fuel and a returnable tube
6 — the Support №2 топливоприёмника


 PERFORMANCE ORDER

  1. Remove the left section of a back seat and its lateral furnish (the Body see the Head).
  2. Unbend a rug of a floor and remove a cover of a service aperture.
  3. Separate a socket of electroconducting of the fuel pump and the gauge of a stock of fuel.
  4. Disconnect from a reception plate the main tube of a fuel tank and закупорьте connection.
  5. Turn out 8 bolts and take assemblage of the fuel pump with the gauge of a stock of fuel from a fuel tank together with a lining, preliminary having disconnected an additional reception fuel hose from a returnable tube.
  6. Remove a support №2 топливоприёмника
  1. Remove assemblage of a regulator of pressure of fuel and a returnable tube and disconnect from it a regulator.
  1. Wring out a clamp and remove the filter топливоприёмника.
  1. By means of two screw-drivers consistently release a support №1 топливоприёмника from four clamps and remove a lining №2 fuel filters.
  1. Remove assemblage of the fuel filter and the fuel pump. For this purpose separate a socket of electroconducting from the fuel pump, extend the specified assemblage and remove a lining №1 fuel filters and a sealing ring of an aperture in топливоприёмной to a plate.
  2. Extend the fuel pump from the fuel filter.
  3. Installation is made in an order, the return to an order of dismantle of components. Use new sealing rings, tighten fixture with demanded efforts.