LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
- Body
   + The external equipment and кузовные elements
   - The salon equipment
      Removal and installation of the panel of devices and the main ware box
      Removal of a carpet covering of a floor and ware box of the central console
      Removal and installation of furnish of a ceiling
      Removal, dismantling, assemblage and installation of forward seats
      Removal, dismantling, assemblage and installation of back seats
      Removal and installation of seat belts and their emergency натяжителей
+ Onboard electric equipment
+ Basic schemes of electric connections


7bd329e4


Removal, dismantling, assemblage and installation of forward seats

Components of assemblage of a forward seat

1 — the Headrest
2 — headrest Support
3 — the Armrest
4 — Electroconducting
5 — the Back
6 — a back Frame
7 — a back Cover
8 — the Heating element of a back
9 — Assemblage of a lumbar support
10 — the Cover
11 — a back Cover

12 — the Cutting washer
13 — a pillow Cover
14 — the Pillow
15 — the Heating element of a pillow
16 — a pillow Frame
17 — the belt Lock
18 — the Cover directing
19 — Internal covers of a pillow
20 — the pillow Panel
21 — a pillow Cover
22 — the Forward cover of a pillow
23 — Buttons of management of seat position

Components of an e/drive of a forward seat

1 — Assemblage of the mechanism of adjustment of an inclination
2 — Assemblage of vertical draught №2
3 — Switches of management of seat position
4 — the E/motor of a drive of the mechanism of adjustment of an inclination
5 — the E/motor of a drive of lifting of a forward part of a pillow
6 — Burn down electroconductings

7 — the Relay of management of seat position
8 — Assemblage of vertical draught
9 — Intensifying draught
10 — the E/motor of a drive of lifting of a back part of a pillow
11 — the Cover directing
12 — the E/motor of a drive of moving of a seat
13 — Assemblage of the mechanism of moving of a seat


 PERFORMANCE ORDER

  1. Remove covers directing by means of a screw-driver.
  2. Turn out 4 bolts, separate sockets and remove a forward seat.
  3. Remove headrests.
  4. Remove buttons of management of seat position, turn out 4 screws and remove the panel of a pillow of a seat, having separated an electroconducting socket.
  5. Turn out 3 screws and remove a cover of a pillow of a seat.
  6. Turn out 2 screws and remove a forward cover of a pillow of a seat.
  7. Remove from assemblage of a pillow electroconducting, turn out 4 bolts, and remove assemblage of a pillow of a seat.
  8. Remove cutting washers, unhook hooks of a cover of a pillow and remove a cover together with a pillow.
  9. Remove cutting washers and disconnect a cover from a seat pillow, if necessary remove a heating element of a pillow.
  1. Remove a back cover, cutting washers and turn out 4 adjusting bolts.

Do not pull electroconducting of a lateral pillow of safety.

  1. Turn out 6 screws and remove internal covers of a pillow of a seat, having disconnected from them electroconducting.
  2. Remove assemblage of a back of a seat.
  3. Remove cutting washers, turn out 2 screws, unhook the holder and a hook of a cover of a back from a back frame.
  4. Remove заглушки bolts, a washer, wavy washers and armrests.
  5. Remove a back frame.
  6. On a driver's seat turn out 2 bolts and remove assemblage of a lumbar support.
  7. Remove cutting washers and disconnect a cover from a seat back, if necessary remove a heating element of a back.
  8. Turn out a bolt and remove the seat belt lock.
  9. Turn out 2 screws and remove switches of management of seat position.
  10. Separate sockets and remove electroconducting.
  11. On a driver's seat give 2 nuts and remove the relay of management of position of a seat and intensifying draught.
  12. Remove covers directing, give 2 nuts and remove a seat belt arm.
  13. Remove assemblage of the mechanism of adjustment of an inclination of a back together with assemblage of vertical draught №2 (only on a seat of the driver) and the e/motor of this mechanism.
  14. On a driver's seat remove vertical draught, vertical draught №2 and e/motors of a drive of lifting of forward and back parts of a pillow.
  15. Remove the e/motor of a drive of moving of a seat.
  16. Assemblage and installation are made upside-down. Tighten fixture with demanded efforts.