LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
- Systems of cooling of the engine, heating, ventilation and air conditioning
   + System of cooling of the engine
   - Systems of heating, ventilation and air conditioning
      The general information
      Replacement, dismantling and block K/V assemblage
      Removal, dismantling, assemblage and installation of the block of the fan of a heater
      Check and replacement of the compressor and magnetic couplings К/В
      Removal and condenser K/V installation
      Checks of components of systems of heating and К/В
      Removal and installation of the block of management
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections


7bd329e4


Removal, dismantling, assemblage and installation of the block of the fan of a heater

Components of installation of the block of the fan of a heater

1 — CD-changer Assemblage
2 — the Right lateral panel обтекателя
3 — the Block of the fan of a heater
4 — the Air line from the passenger party

5 — Burn down electroconductings
6 — Bottom section №2 of the panel of devices
7 — the Overlay of a threshold of the right forward door
8 — the Bottom cover of №2 panels of devices

Components of assemblage of the block of the fan of a heater

1 — the Case of the block of the fan of a heater
2 — Салонный the filter
3 — the Case салонного the filter

4 — the E/motor of giving of external air
5 — the E/motor of the fan of a heater
6 — a filter Cover


 PERFORMANCE ORDER

  1. Remove following parts:
    • The right lateral panel обтекателя;
    • Overlay of a threshold of the right forward door;
    • Bottom a cover of №2 panels of devices;
    • Bottom section №2 of the panel of devices;
    • CD-changer assemblage (at a corresponding complete set);
    • Assemblage of a forward pillow of safety of the forward passenger (the Onboard electric equipment see the Head);
  2. Turn out three screws and remove an air line from the forward passenger.
  3. Separate sockets, ослабьте a collar of fastening of a plait of electroconducting.
  4. Turn out two bolts, two nuts, the screw and remove the block of the fan of a heater.
  5. Remove салонный the heater filter (the Section Check and replacement салонного the filter of a heater and К/В see).
  6. Turn out on three screws and remove the e/motor of the fan of a heater and the e/motor of giving of external air.
  7. Check up serviceability of functioning of the e/motor and the gauge of giving of external air.
  8. Assemblage and installation are made in an order, the return to an order of dismantle of components.