LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   The general information
   Diagnostics of malfunctions of an onboard electric equipment - the general information
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Screen wipers and стеклоомыватели
   Replacement of lamps накаливания
   Removal and installation of a casing of a steering column and подрулевых switches
   Check of serviceability of functioning of some auxiliary systems
   Removal and aerial installation
   Removal and installation of a combination of devices
   Adjustment of an inclination of headlights
   Removal and installation of components of system SRS
   Removal and installation of components стеклоподъёмников and screen wipers
+ Basic schemes of electric connections


7bd329e4


Removal and installation of a combination of devices

Components of assemblage of a combination of devices

1 — the Back cover
2 — ECU К/В and combinations of devices
3 — Contacts
4 — the Payment
5 — the Case

6 — the Plate
7 — speedometer Assemblage
8 — the Forward insert
9 — the Lamp
10 — Protective glass


 PERFORMANCE ORDER

  1. Turn out 9 screws and remove a back cover of a combination of devices.
  2. Turn out 4 bolts, remove ECU and 2 complete sets of contacts.
  3. Turn out 4 screws, separate 6 sockets and remove the printed-circuit board from the case.
  1. Remove a forward insert and protective glass.
  2. Turn out the screw and remove a plate.
  3. Turn out 2 screws and remove speedometer assemblage.
  4. Installation is made upside-down.