LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   - The power supply system
      The general data and security measures
      Сбрасывание pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, the gauge of a stock of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of a fuel tank and fuel lines
      Removal and air cleaner installation
      Removal, installation and adjustment of the case of a throttle and gauge TPS
      Removal and installation of components of system ACIS
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections


7bd329e4


Removal and installation of a fuel tank and fuel lines

Components of installation of a fuel tank and fuel lines

1 — the Coal adsorber
2 — the Adjusting plate of a ventilating tube
3 — the Lining
4 — the Gauge of a stock of fuel
5 — Hose EVAP
6 — the Protective plate №3 fuel tanks
7 — the Gauge of fuel evaporations
8 — the Adjusting plate of tube EVAP
9 — the Clip
10 — the Cover of a jellied mouth of a fuel tank
11 — Rings
12 — the Jellied mouth of a fuel tank
13 — the Tube of ventilation of a fuel tank
14 — the Valve отсечки fuel

15 — the Reception tube of a fuel tank
16 — the Reception hose of a fuel tank
17 — the Additional soaking up fuel hose
18 — the Main tube of a fuel tank
19 — the Clamp of connection of a tube
20 — Assemblage of the fuel pump and the gauge of a stock of fuel
21 — the Adjusting plate of a tube of ventilation of a fuel tank
22 — the Fuel tank
23 — the Control valve of level of fuel
24 — the Right bandage tape of a fuel tank
25 — the Left bandage tape of a fuel tank
26 — the Bottom central protective plate of a fuel tank
27 — the Right protective plate of a fuel tank
28 — the Left protective plate of a fuel tank


 PERFORMANCE ORDER

  1. Before removal of a fuel tank as more as possible devastate it. Observe safety measures (the Section the General data and security measures see).
  1. At installation of fuel lines connect them.
  1. Use new linings, tighten fixture with demanded efforts.