LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
- Трансмиссионная a line
   The general information
   Removal and installation карданного a shaft
   Removal, dismantling, assemblage and installation of forward power shafts
   Removal, dismantling, assemblage and installation of back power shafts
   Replacement of a forward epiploon of back differential
   Replacement of lateral epiploons of back differential
   Removal and installation of the case of back differential, differential dismantling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections


7bd329e4


Replacement of lateral epiploons of back differential

Components of installation of lateral epiploons of back differential

1 — the Lining
2 — the Stopper of a jellied aperture
3 — the Power shaft

4 — the Lock ring
5 — the Epiploon
6 — Lateral transfer
7 — the Drain stopper


 PERFORMANCE ORDER

  1. Lower oil of back differential.
  2. Remove a power shaft, preliminary reliably having propped up it (see Has undressed Removal, dismantling, assemblage and installation of back power shafts).
  3. By means of the special adaptation remove lateral transfer of differential and remove from it a screw-driver a lock ring.
  4. By means of a special stripper take an old epiploon and запрессуйте new заподлицо with an end face of its case.
  5. Put on epiploon edges universal greasing.
  6. Establish on баковую transfer a new lock ring and establish transfer to differential.
  7. Make sure, that lateral transfer of differential cannot be pulled out a hand, without the special adaptation.
  8. Establish a power shaft and fill differential with oil according to requirements of Specifications of Head Transmissionnaja a line.