LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
- Options and car routine maintenance
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   The general checks of brake system
   Check and replacement салонного the filter of a heater and К/В
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air cleaner
   Check of a condition of system of release of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of a brake liquid, prorolling of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges карданного a shaft
   Check of working capacity of lighting devices, horn and the heater fan
   System EVAP check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care it
   Replacement of a cooling liquid (ОЖ)
   Check and adjustment клапанных backlashes
   Check and adjustment of a course of pedals of a working and lay brake
   Check of boots of a lay brake
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections


7bd329e4


Check of a condition of system of release of the fulfilled gases

 PERFORMANCE ORDER

  1. Check should be made at the cold engine, therefore it is better to be engaged in it before the first trip for current day or not earlier than in three hours after engine deenergizing. Check up a condition of all system of release, beginning from the engine and finishing an exhaust pipe cut. In an ideal this check should be spent at the lifted car when to it there is an easy approach from below. Поддомкратьте the car and reliably establish it on support.
  2. Check up pipes and their connections on presence of signs of leaks, strong corrosion and damages. Check up a condition and reliability of fastening of all collars and rubber подвесов systems.
  3. Simultaneously examine the car bottom on presence of holes, the corrosion, the dispersed seams and the other defects supposing penetration of fulfilled gases in salon of the car. Close up all apertures suitable hermetic.
  4. Release system, especially its support and подвесы, often are a source of a roar and other unpleasant sounds. Shake and pull pipes, mufflers and каталитический the converter (at a corresponding complete set). If these components adjoin to elements of a body or suspension bracket details, replace their fixture.
  5. Examine electroconducting of the ljambda-probes established on reception pipes and for back каталитическим by the converter. If necessary replace conducting together with the gauge.
  6. Survey of an internal surface of an exhaust pipe allows to define a current working condition of the engine. The structure of adjournment in a pipe speaks about quality of options of the engine. If the pipe from within black and smoked, can specify it in necessity of check of fuel system.