LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
- Options and car routine maintenance
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   The general checks of brake system
   Check and replacement салонного the filter of a heater and К/В
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air cleaner
   Check of a condition of system of release of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of a brake liquid, prorolling of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges карданного a shaft
   Check of working capacity of lighting devices, horn and the heater fan
   System EVAP check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care it
   Replacement of a cooling liquid (ОЖ)
   Check and adjustment клапанных backlashes
   Check and adjustment of a course of pedals of a working and lay brake
   Check of boots of a lay brake
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections


Check of a condition of components of a suspension bracket and steering

Components of a steering drive and suspension bracket should be checked regularly – their deterioration can serve as the reason of excessive and dangerous deterioration of tyres, deterioration of running characteristics and controllability of the car, and also increase of the expense of fuel. More detailed information on components of a suspension bracket and steering system is resulted in the Head the Suspension bracket and a steering.

Check of shock-absorbers

 PERFORMANCE ORDER

  1. Park the car on an equal platform, switch off the engine and cock a lay brake. Check up pressure in tyres.
  2. Press a hand one of corners of the car and release a hand. Pay attention to body movement. It should cease to shake and come back in a starting position after one or two fluctuations.
  3. If the car continues to be shaken or has not come back in a starting position the possible reason of it is the worn out shock-absorber.
  4. Repeat the procedure described above for each of three remained corners of the car.
  5. Поддомкратьте the car and reliably establish it on props.
  6. Examine shock-absorbers on presence of signs of leak of a liquid. The easy film of a liquid is not the reason for anxiety. In case of leak detection make sure, that the liquid follows from the shock-absorber, instead of whence still. If it nevertheless leak from the shock-absorber, replace shock-absorbers in steam on one bridge (or all four).
  7. Check up reliability of installation and integrity of shock-absorbers. Check up the top support of racks on presence of damages and deterioration signs. In case of detection of those replace racks.
  8. In case of need replacements of shock-absorbers address for instructions to the Head the Suspension bracket and a steering. Always replace both components on one bridge. If it is possible, try to replace all four components in the complete set.

Check of a condition of system of a steering and suspension bracket

 PERFORMANCE ORDER

  1. Examine components of system of a steering on presence of damages and deformations. Pay attention to signs of leak of the liquid, the damaged linings, protective covers and штуцерные of connection.
  2. Clear the bottom end of a rotary fist of a dirt. Ask to grasp the assistant a bottom edge of a wheel and to shake it, and at this time observe of movement of the spherical support connecting a rotary fist with the lever of a suspension bracket. Examine protective covers of spherical support on presence of ruptures. At detection люфта or the torn protective covers, it is necessary to replace a spherical support and its protective cover.
  3. Grasp each of forward wheels for forward and back edges and try to turn its first line inside, and back outside to check up presence люфта in a steering drive. If it is found out люфт, check up, whether ослабли fastenings of the steering mechanism and hinges of steering draughts. Ослабшие fastenings tighten. The worn out hinges (check up at first reliability of a tightening of nuts) can be the reason ослабших steering draughts. The additional information on system of a steering and a suspension bracket can be found in the Head the Suspension bracket and a steering.

Check люфта a steering

 PERFORMANCE ORDER

  1. Establish a steering wheel in position of rectilinear movement.
  2. Move a steering wheel here and there, observing thus behind forward wheels. The steering wheel can have maximum люфт 30 mm.
  3. At большем люфте a steering wheel check up draughts of a steering, the steering mechanism and люфт bearings of a forward suspension bracket.
  4. Strongly move steering draughts a hand. Spherical hinges should not have люфта, otherwise replace hinges or steering draughts.

Check of tips of steering draughts, spherical support and covers of the steering mechanism

 PERFORMANCE ORDER

  1. Shine with a lamp пыльники the bottom spherical support at the left and on the right and check up them on presence of damages.
  1. Shine with a lamp пыльник a tip of steering draught at the left and on the right and check up it on presence of damages.
  1. In the presence of damages пыльников from safety reasons it is necessary to replace the corresponding hinge with пыльником since pollution lead to hinge destruction.
  2. Strongly move steering draughts a hand every which way. The hinge should not have люфтов. Otherwise it is necessary to replace a tip of steering draught.
  3. Check up reliability of a tightening of counternuts of tips of steering draughts and a nut of fastening of a finger of the hinge, not rotating it.
  1. Check up protective covers (3) steering mechanisms, if necessary replace them with the new.





7bd329e4