LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
- Options and car routine maintenance
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   The general checks of brake system
   Check and replacement салонного the filter of a heater and К/В
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air cleaner
   Check of a condition of system of release of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of a brake liquid, prorolling of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges карданного a shaft
   Check of working capacity of lighting devices, horn and the heater fan
   System EVAP check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care it
   Replacement of a cooling liquid (ОЖ)
   Check and adjustment клапанных backlashes
   Check and adjustment of a course of pedals of a working and lay brake
   Check of boots of a lay brake
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections


Check and adjustment of a course of pedals of a working and lay brake

Check

 PERFORMANCE ORDER

  1. Measure distance from the released pedal of a brake to a floor.
  1. If the measured size mismatches requirements of Specifications of the Head of Adjustment and car routine maintenance, adjust height of lifting of a pedal of a brake.
  2. Muffle the engine and some times squeeze out a pedal of a working brake that in the vacuum amplifier does not remain depression.
  3. Press a pedal of a working brake a hand till the moment of sensation of resistance and measure a course of a pedal from this position before the released position.
  4. If the received size mismatches requirements of Specifications of the Head of Adjustment and car routine maintenance, check up backlash Д/В of stoplights. If this backlash satisfactory, the reason is covered in brake system.
  5. Release a pedal of a working brake and at the started engine squeeze out it with effort 490 N.Izmerte distance from a pedal to a floor.
  6. If the measured size mismatches requirements of Specifications of the Head of Adjustment and car routine maintenance, check up a condition of brake system.
  7. Slowly squeeze out a pedal of a drive of a lay brake against the stop with effort 249 Н and count quantity of clicks.
  8. If the quantity of clicks does not lay in the range from 5 to 7, adjust a pedal of a drive of a lay brake.

Adjustment of height of lifting of a pedal of a brake

 PERFORMANCE ORDER

  1. Remove the bottom left section of the panel of devices (the Body see the Head).
  2. Separate socket Д/В of stoplights, give its counternut and remove the gauge. Give a counternut of a press rod.
  3. Adjust height of lifting of a pedal of a brake, turning press a pedal rod then tighten its counternut with effort of 26 Nanometers.
  4. Establish Д/В stoplights and connect a socket of its electroconducting.
  5. Squeeze out a pedal of a working brake on 510 mm and turn Д/В stoplights to block its nut in position of deenergizing of stoplights.
  6. Squeeze out a pedal of a working brake on 510 mm and make sure of inclusion of stoplights.
  7. After adjustment check up a free course of a pedal of a working brake and establish the bottom left section of the panel of devices.

Adjustment of a pedal of a drive of a lay brake

Before adjustment of a lay brake make sure that the backlash of a boot of a lay brake is adjusted (see the Head the Brake system). The regulator of a lay brake is located under the bottom, on the left side.


 PERFORMANCE ORDER

  1. Make sure of that the pedal of a drive of a lay brake is released.
  1. Fix a screw coupler and give a counternut (A).
  1. Turning a screw coupler, adjust a pedal of a drive of a lay brake.
  2. Tighten a counternut (A) with effort of 5 Nanometers.
  3. Some times cock a lay brake and again check up a pedal course.
  4. If it is not possible to make adjustment by means of a nut (A), use a nut (B).
  5. Make sure of that the lay brake is not taken and К/Л a lay brake works regularly.





7bd329e4